Infiniti QX30 Forum banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
646 Posts
  1. Remove light & rain sensor cover by disengaging fixing paws and pulling down on the cover.
  2. Disconnect mirror harness connector.
  3. Rotate inside mirror using wrench on "flat" spots at top of mirror stem. Rotate in a counter-clockwise direction, from the perspective of looking up at the roof.
Installation is reverse of removal.

New mirrors can be calibrated for both LHD and RHD. Use a spanner, small screwdriver, or pick to rotate each lens of the courtesy lights to the appropriate setting. "L" for LHD vehicles and "R" for RHD vehicles.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top