Infiniti QX30 Forum banner
1 - 2 of 2 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
I have in transit a rear view mirror with the homelink system for replacing the original one in my 2015 gla 250. I've scoured other forums including the CLA ones and youtube but can't find instructions on how to safely remove/replace it. Closest thing is one particular link showing the plastic pieces around the mirror stem stating they snap together but no additional info on the procedure for safely removing them to get to the mirror attachment. Appreciate any guidance :)...

· Super Moderator
665 Posts
  1. Remove light & rain sensor cover by disengaging fixing paws and pulling down on the cover.
  2. Disconnect mirror harness connector.
  3. Rotate inside mirror using wrench on "flat" spots at top of mirror stem. Rotate in a counter-clockwise direction, from the perspective of looking up at the roof.
Installation is reverse of removal.

New mirrors can be calibrated for both LHD and RHD. Use a spanner, small screwdriver, or pick to rotate each lens of the courtesy lights to the appropriate setting. "L" for LHD vehicles and "R" for RHD vehicles.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.